This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.


Tools

Natural Gamma Tool
Measures the naturally occurring gamma radiation found in rocks and sediment.

Gamma-Gamma Tool
Indicates the apparent density of the material surrounding the tool.

Spectral Gamma Tool
Measures the gamma energy spectra produced by the decay of uranium, thorium, potassium and other man-made radioactive isotopes.

Water Sampler Tool
Collects fluid samples from specific depths in a borehole.

Cement Bond Log
Sonic tool that measures the condition of the cement/grout bond around a borehole’s steel lining.

Impeller Flowmeter Tool
This tool is used to determine vertical fluid velocity within a borehole and identify areas of inflow or outflow.

Acoustic Imager (Televiewer) Tool
Produces an image of the borehole wall using the travel time and amplitude of an acoustic signal transmitted and received by a rotating ultrasonic sensor in the tool.

Acoustic Imager Casing Evaluation Tool
Produces an image of the borehole wall or casing using the travel time and amplitude of an acoustic signal transmitted and received by a rotating ultrasonic sensor in the tool.

Borehole Magnetic Resonance (BMR) Tool
Measures the amount of water present in the pore space using permanent magnets and antenna, similar to an MRi machine in a hospital.

Caliper Tools
These tools measure the mean diameter of boreholes. They are used to check the integrity of borehole linings, and where a borehole is unlined to identify zones of washout, breakout or fissures.

Casing Collar Locating Tool
This tool measures changes in magnetic flux due to the presence of magnetic material and is used to determine the position of steel casing, its joins and other changes in the mass of magnetic material.

Casing Collar Locating Tool – Pile Detection
This tool measures changes in magnetic flux due to the presence of magnetic material and is used to determine the position of steel casing, its joins and other changes in the mass of magnetic material.

Dual Induction Tool
The induction tool generates an electromagnetic field in the vicinity of the borehole and measures the response of the formations to this applied field, from which conductivity is determined.

Dual Neutron Tool
The neutron tool essentially responds to the hydrogen content of the surrounding material.

Dual Spaced Focused Resistivity Tool
This tool measures the resistivity of the material surrounding the borehole.

Dual Video Camera
This borehole camera offers a twin view set up allowing the operator to switch between either a forward or side view camera.

Dual Video Camera With Orientation
This borehole camera offers a twin view set up allowing the operator to switch between either a forward or side view camera. The camera unit has a built in orientation system.

Heat Pulse Flowmeter Tool
The heat pulse flowmeter consists of two very sensitive temperature sensors, one 5cm above and one 5cm below, a small heating element.

Formation Density Tool
The logs from each detector indicate the apparent density of the formation within a radius of investigation related to the spacings.

Full Wave Sonic Tool (FWS)
This tool has been specially designed to provide a full wave-form recording of sonic signals and uses fixed spaced transmitter – receivers.

Gyro Verticality Tool
The North Seeking Gyro sonde provides full multishot orientation and deviation surveys of boreholes in any environment, including steel casing and drill pipe.

Magnetic Susceptibility Tool
This is a two or three coil sonde designed to measure apparent formation magnetic susceptibility.

Normal Resistivity + SP Tool (Elog)
This tool measures the resistivity of the material surrounding the borehole.

Optical Imager Tool
A precision-machined prism and CCD camera assembly permits a high definition optical image of the borehole wall to be captured in a variety of horizontal and vertical resolutions.

P&S Wave μSeismic Tool
The μSeismic Tool allows simultaneous measurement of P&S wave velocities. This method gives better accuracy and resolution than other seismic methods.

Slimline Video Camera
This camera is designed to survey both narrow boreholes and those with a narrow access hole.

Temperature And Electrical Conductivity Tool
There is a natural geothermal gradient of increasing temperature (T) with depth.

Verticality Tool
This tool employs a combination of magnetometers and inclilometers to measure the inclination/tilt and direction/azimuth of the borehole.

ROV (Remote Vehicle Inspection)
European Geophysical Services Ltd offers a specialist survey service using a Remote Operated Vehicle (ROV) which allows underwater inspection of reservoir dam walls, water tanks, underground service reservoirs, flooded tunnels and adits wells and shafts.

Water Quality Tool
This tool incorporates high quality sensors to measure three parameters of water quality– Dissolved Oxygen, Acidity and REDOX (Reduction Oxidation).

Nitrate Tool
The Nitrate sonde allows for a continuous profile of the Nitrate levels in borehole fluids to be recorded. The Nitrate Tool uses a sealed system that measures the attenuation of Ultraviolet (UV) at specific wavelengths.